What is the role of high-traffic style?

What is the function of high flow style?

High flow style, air filter. The air filter on the vehicle engine is used to filter the air required for engine operation. This device needs to be available on gasoline engine vehicles. Its main function is to filter dust and impurities from the air to ensure the purity of the air. This can protect the engine, so what is the function of high flow style?

What is the function of high flow style?

1. From the perspective of car enthusiasts, the air filter installed on original vehicles is usually made of paper and wood pulp. When the car has been driven for a while, the surface will adsorb a large amount of dust, which affects the intake.

2. High-quality high flow air filter components use a three-layer special structure to filter external air. The first layer is an oil layer that can prevent external dust and dirt. The back layer is a fiber cloth structure responsible for blocking more small dust. After three layers of protection, the air inhaled into the engine is cleaner, and the flow increases, which can slightly increase engine horsepower. It needs to be cleaned with a cleaner designed for wet filters at a certain time or mileage (usually 5000 kilometers) to remove the dirt attached to the top so that the style can restore its original filtering performance. This has been very effective for economic benefits over the years.

3. Increasing horsepower output When it comes to modifying car power, it usually starts from the intake part. From the perspective of the current domestic modification market, there are two main methods to modify air intake. One is to retain the design of the original car intake box and replace it with a high flow style; the other is to use the air filter as a mushroom head-type air filter.

4. The so-called mushroom head means that the appearance of the air filter is very similar to that of a mushroom. The external area and the ordinary air filter can achieve several times, and the efficiency of the intake after replacement is greatly improved. However, there are drawbacks to the profit, that is, after replacing the "mushroom head", the engine's intake noise will increase. In addition, the cost of this modification is also higher than 1,000 yuan. Installing a high flow style can effectively improve the efficiency of engine intake and increase engine power. When the engine accelerates at high speed, the engine power performance can be significantly improved, and the acceleration is strong.

5. The high flow style is made of special chemical fibers, which can increase intake, reduce the resistance of engine intake, and improve the intake and volume efficiency per unit time during engine operation. The increase in the measurement of flow in the flow meter achieves the purpose of increasing high horsepower output.

What are the dangers of high flow style?

Loading high flow style has no drawbacks. If you persist, it is just more fuel consumption. First, the dangers are usually said on the internet mainly include the following points:

1. Installing a larger traffic method will increase the number of intake ports, and dust will increase. At first glance, this seems correct, but in fact, it is wrong. Because this statement is established, that is, the intake area is as large as that area. The intake area is affected by the material. High flow materials are different from the original style. For example, the original style is paper, which is dry filtration. High flow style is oily filtration. The intake volume increases, but the filtering effect is not worse than the original factory.

2. Increasing the intake volume to increase the time and space hybrid ratio, low torque loss or poor torque performance, through the throttle, flow sensor, oxygen sensor, etc. Everyone adjusts the air mixture ratio. The combustion condition is detected by the oxygen sensor, and the data stream of the flow sensor is adjusted with the open traffic.

3. Increasing the amount of intake reduces the engine's intake resistance and improves the intake volume and volume efficiency per unit time when the engine is running. The injector will spray more gasoline to match it, so more oil and gas (not dense) enters the cylinder to achieve the purpose of increasing horsepower output.